Lọc

Gậy Golf Utility Honma Beres 09 4sao

36,408,000vnđ

Liên hệ
Hotline đặt hàng 028.6686.1177 – 0907.33.22.66
(8-20h cả T7, CN)

Email: info@vhgolf.com.vn

Mô tả

BERES (2024 model) UTILITY 4STAR

A UT that allows you to aim dead at the pin with a high trajectory.

Placing the weight closer to the back heel improves grip performance. Achieves stable directionality and excellent straight-line performance. The center of gravity is designed to be optimal depending on the number of clubs, so you can aim dead at the green from any lie.

Tungsten weight

By placing a 14g (screw included) weight near the back heel, grip performance is improved.

Uneven thickness face & crown

Repulsion performance is improved by making the face area and crown thinner. Furthermore, the repulsion area has been expanded (compared to the previous model).

Sole thickness and center of gravity flow design by count

Designed to generate appropriate spin for each number and stop it on the green. You can aim for the proper flight distance with the appropriate number.

Adopting the industry’s first high-strength carbon sheet -ARMRQ FX shaft-

The ARMRQ shaft has evolved to allow for easier grip and higher trajectory. This time, we purposely reduced the number of fabric shafts, which have increased with each model change, to reduce weight, while maintaining strength by adopting a highly elastic 70t pitch for the fibers used for the shafts. This makes it possible to reduce weight, make the flex more supple, have a kick point closer to the hand, and place the balance point closer to the head, achieving high reproducibility and “flying and not bending.” 17% lighter than the previous model for the fabric alone

*Metal hybrid 5-shaft sheet

Aluminum High-strength material laminated with highly elastic 70t pitch on the back side of the metal shaft. Since shaft winding requires special technology, this is the first seat in the industry that was made possible by HONMA, which employs highly skilled craftsmen.

By having a kick point at hand, the directional stability of the trajectory is improved.

ARMRQ FX has a kick point that is slightly closer to the hand than the previous model, resulting in a more stable swing trajectory and more accurate shots. In addition, the increased suppleness creates a greater bend and improves flight distance performance.

The lighter shaft allows the head to accelerate further at impact.

The new shaft, which is lighter than the previous model, improves head balance first. This allows the head to run and increase flight distance.

The performance of the shaft increases depending on the grade.

All grades use the carbon fiber Torayca® MX series prepreg developed by Toray Industries, Inc., which has both high compressive strength and high modulus of elasticity . Furthermore, because HONMA’s technology adjusts the shaft structure and materials used to match the grade, the higher the grade, the better the distance performance and directional stability.

*Trading Card M40X (used for 3S grade or higher)

It is characterized by the shape memory performance of a new material that goes beyond common sense by significantly improving the elongation rate of high-modulus carbon. Compared to “T1100G”, it has superior shape retention performance and is suitable for long lengths and reinforcement.

*Trading Card® T1100G (common to all grades)

HONMA was the first in the industry to use this high-performance prepreg, which is now widely used, including by other manufacturers. Achieves both “high elasticity and high strength”.

The kick point has been moved a little closer to hand than the previous model, making timing easier. The large bend increases flight distance with a high trajectory. In addition, the ease of swinging improves the reproducibility of swings and achieves stable shots.

The highly elastic Trading Card® M40X , which pursues the ultimate in both fiber strength and elastic modulus , provides superior playing performance that efficiently accelerates head speed without waste, while suppressing torque and improving stability.

In order to further increase head speed, the kick point is moved closer to the tip. At the same time, crushing and torque are further suppressed, and stability is increased along with initial speed.

From the 4S grade, the bias layer has been further strengthened to generate strong torsional return power. This provides ultimate flight and stability.

ARMRQ lightweight model -ARMRQ FX LIGHT-

This shaft is recommended for seniors and low swing speed players who cannot swing or increase distance with the regular ARMRQ FX/R flex, and female golfers who feel that regular ladies’ clubs are underspec.

BERES09 UTILITY – SPEC

No.			U19	U22	U25
Loft (deg.)			19.0	22.0	25.0
Head Material			SUS630 Body (Casting)＋Tungsten Weight＋High Strength Custom Steel (Rolling)
Head Volume(㎤)			136
Lie Angle (deg.)			59.5
Length(inch) ※60 Degree Low			40.5	40.0	39.5
Swing Weight/Total Weight(g)	ARMRQ FX LIGHT	R	C8 / approx.313	C8 / approx.318	C8 / approx.323
	ARMRQ FX	R	D0 / approx.318	D0 / approx.323	D0 / approx.328
		SR	D1 / approx.324	D1 / approx.329	D1 / approx.334
		S	D1 / approx.326	D1 / approx.331	D1 / approx.336

Made in Japan

BERES09 UTILITY – SHAFT

ARMRQ FX 4S

ARMRQ FX LIGHT 4S

ARMAQ FX LIGHT BLACK

ARMRQ FX 4S & ARMRQ FX LIGHT 4S

Model	Flex	Length(mm)	Weight(g)	Torque(°)	Tip Diameter(㎜)	Butt Diameter(㎜)	Kick-Point
ARMRQ FX LIGHT 4S	R	1,030	40.5	6.85	9.3	15.1	MID-LOW
ARMRQ FX 4S	R	1,030	43.0	6.85	9.3	15.1	MID-LOW
	SR		47.5	6.15		15.4
	S		49.0	6.05		15.4

BERES09 UTILITY – Grip

NAME	GR HONMA RUBBER 41 GD
MATERIAL	RUBBER
WEIGHT (g)	41.0
SIZE	60

Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Gậy Golf Utility Honma Beres 09 4sao

BERES (2024 model) UTILITY 4STAR

A UT that allows you to aim dead at the pin with a high trajectory.

Placing the weight closer to the back heel improves grip performance. Achieves stable directionality and excellent straight-line performance. The center of gravity is designed to be optimal depending on the number of clubs, so you can aim dead at the green from any lie.

Tungsten weight

By placing a 14g (screw included) weight near the back heel, grip performance is improved.

Uneven thickness face & crown

Repulsion performance is improved by making the face area and crown thinner. Furthermore, the repulsion area has been expanded (compared to the previous model).

Sole thickness and center of gravity flow design by count

Designed to generate appropriate spin for each number and stop it on the green. You can aim for the proper flight distance with the appropriate number.

Adopting the industry’s first high-strength carbon sheet -ARMRQ FX shaft-

*Metal hybrid 5-shaft sheet

Aluminum High-strength material laminated with highly elastic 70t pitch on the back side of the metal shaft. Since shaft winding requires special technology, this is the first seat in the industry that was made possible by HONMA, which employs highly skilled craftsmen.

By having a kick point at hand, the directional stability of the trajectory is improved.

ARMRQ FX has a kick point that is slightly closer to the hand than the previous model, resulting in a more stable swing trajectory and more accurate shots. In addition, the increased suppleness creates a greater bend and improves flight distance performance.

The lighter shaft allows the head to accelerate further at impact.

The new shaft, which is lighter than the previous model, improves head balance first. This allows the head to run and increase flight distance.

The performance of the shaft increases depending on the grade.

*Trading Card M40X (used for 3S grade or higher)

It is characterized by the shape memory performance of a new material that goes beyond common sense by significantly improving the elongation rate of high-modulus carbon. Compared to “T1100G”, it has superior shape retention performance and is suitable for long lengths and reinforcement.

*Trading Card® T1100G (common to all grades)

HONMA was the first in the industry to use this high-performance prepreg, which is now widely used, including by other manufacturers. Achieves both “high elasticity and high strength”.

The kick point has been moved a little closer to hand than the previous model, making timing easier. The large bend increases flight distance with a high trajectory. In addition, the ease of swinging improves the reproducibility of swings and achieves stable shots.

The highly elastic Trading Card® M40X , which pursues the ultimate in both fiber strength and elastic modulus , provides superior playing performance that efficiently accelerates head speed without waste, while suppressing torque and improving stability.

In order to further increase head speed, the kick point is moved closer to the tip. At the same time, crushing and torque are further suppressed, and stability is increased along with initial speed.

From the 4S grade, the bias layer has been further strengthened to generate strong torsional return power. This provides ultimate flight and stability.

ARMRQ lightweight model -ARMRQ FX LIGHT-

This shaft is recommended for seniors and low swing speed players who cannot swing or increase distance with the regular ARMRQ FX/R flex, and female golfers who feel that regular ladies’ clubs are underspec.

BERES09 UTILITY – SPEC

No.

U19

U22

U25

Loft (deg.)

19.0

22.0

25.0

Head Material

SUS630 Body (Casting)＋Tungsten Weight＋High Strength Custom Steel (Rolling)

Head Volume(㎤)

136

Lie Angle (deg.)

59.5

Length(inch) ※60 Degree Low

40.5

40.0

39.5

Swing Weight/Total Weight(g)

ARMRQ FX LIGHT

R

C8 / approx.313

C8 / approx.318

C8 / approx.323

ARMRQ FX

R

D0 / approx.318

D0 / approx.323

D0 / approx.328

SR

D1 / approx.324

D1 / approx.329

D1 / approx.334

S

D1 / approx.326

D1 / approx.331

D1 / approx.336

Made in Japan

BERES09 UTILITY – SHAFT

ARMRQ FX 4S

ARMRQ FX LIGHT 4S

ARMRQ FX 4S & ARMRQ FX LIGHT 4S

Model

Flex

Length(mm)

Weight(g)

Torque(°)

Tip Diameter(㎜)

Butt Diameter(㎜)

Kick-Point

ARMRQ FX LIGHT 4S