Lọc

Gậy Golf Sắt Iron Honma Beres09 5sao (#5-#11, AW, SW)

1,092,240,000vnđ

Liên hệ
Hotline đặt hàng 028.6686.1177 – 0907.33.22.66
(8-20h cả T7, CN)

Email: info@vhgolf.com.vn

Mô tả

BERES (2024 model) IRON 5STAR

IRON allows you to aim for the pin with high trajectory flight.

The synergistic effect of the newly developed uneven thickness face and wide L-cup face achieves high distance performance and forgiveness. The more advanced design allows you to aim dead at the pin with a high trajectory. In addition, it is equipped with a mid-layer emblem with a new structure. It suppresses the shock at impact, producing a soft feel and pleasant sound.

Uneven thickness face structure

The evolved face thickness increases the repulsive force of the face. Achieves high distance performance with high initial velocity and high trajectory.

Wide L cup face

By eliminating the receiver on the body side, the face area has been expanded. The repulsion area has been expanded, and the high tolerance against vertical and horizontal hit point shakes allows for stable shots.

Vibration absorbing resin midlayer

Vibration at the time of impact is absorbed by incorporating vibration-absorbing resin inside the cavity. This results in a comfortable hitting feel and sound.

Adopting the industry’s first high-strength carbon sheet -ARMRQ FX shaft-

The ARMRQ shaft has evolved to allow for easier grip and higher trajectory. This time, we purposely reduced the number of fabric shafts, which have increased with each model change, to reduce weight, while maintaining strength by adopting a highly elastic 70t pitch for the fibers used for the shafts. This makes it possible to reduce weight, make the flex more supple, have a kick point closer to the hand, and place the balance point closer to the head, achieving high reproducibility and “flying and not bending.” 17% lighter than the previous model for the fabric alone

*Metal hybrid 5-shaft sheet

Aluminum High-strength material laminated with highly elastic 70t pitch on the back side of the metal shaft. Since shaft winding requires special technology, this is the first seat in the industry that was made possible by HONMA, which employs highly skilled craftsmen.

By having a kick point at hand, the directional stability of the trajectory is improved.

ARMRQ FX has a kick point that is slightly closer to the hand than the previous model, resulting in a more stable swing trajectory and more accurate shots. In addition, the increased suppleness creates a greater bend and improves flight distance performance.

The lighter shaft allows the head to accelerate further at impact.

The new shaft, which is lighter than the previous model, improves head balance first. This allows the head to run and increase flight distance.

The performance of the shaft increases depending on the grade.

All grades use the carbon fiber Torayca® MX series prepreg developed by Toray Industries, Inc., which has both high compressive strength and high modulus of elasticity. Furthermore, because HONMA’s technology adjusts the shaft structure and materials used to match the grade, the higher the grade, the better the distance performance and directional stability.

*Trading Card M40X (used for 3S grade or higher)

It is characterized by the shape memory performance of a new material that goes beyond common sense by significantly improving the elongation rate of high-modulus carbon. Compared to “T1100G”, it has superior shape retention performance and is suitable for long lengths and reinforcement.

*Trading Card® T1100G (common to all grades)

HONMA was the first in the industry to use this high-performance prepreg, which is now widely used, including by other manufacturers. Achieves both “high elasticity and high strength”.

The kick point has been moved a little closer to hand than the previous model, making timing easier. The large bend increases flight distance with a high trajectory. In addition, the ease of swinging improves the reproducibility of swings and achieves stable shots.

The highly elastic Trading Card® M40X , which pursues the ultimate in both fiber strength and elastic modulus , provides superior playing performance that efficiently accelerates head speed without waste, while suppressing torque and improving stability.

In order to further increase head speed, the kick point is moved closer to the tip. At the same time, crushing and torque are further suppressed, and stability is increased along with initial speed.

From the 4S grade, the bias layer has been further strengthened to generate strong torsional return power. This provides ultimate flight and stability.

ARMRQ lightweight model -ARMRQ FX LIGHT-

This shaft is recommended for seniors and low swing speed players who cannot swing or increase distance with the regular ARMRQ FX/R flex, and female golfers who feel that regular ladies’ clubs are underspec.

BERES09 IRON – SPEC

No. /Loft (deg.)			#5 / 21.0	#6 / 24.0	#7 / 27.0	#8 / 31.0	#9 / 35.0	#10 / 40.0	#11 / 45.0	AW / 50.0	SW / 55.0
Head Material/Manufacturing			【#5-9】Mild Steel 25C Body (Forged)＋AM355P Face (Casting) 【#10-SW】Mild Steel S25C Body (Forged)＋ES235 Face
Finish			Nickel Chrome Plating (2-layer Plating)＋Satin+Mirror＋Painting (Gold Plating)
Lie Angle (deg.)			61.0	61.5	62.0	62.5	63.0				64.0
Offset(mm)			4.0	3.7	3.5				3.0		2.0
Length(inch)			38.25	37.75	37.25	36.75	36.25	35.75	35.5		35.0
Swing Weight/Total Weight(g)	ARMRQ FX LIGHT	R	C8 / approx.343	C8 / approx.349	C8 / approx.356	C8 / approx.362	C8 / approx.369	C8 / approx.375	C8 / approx.378		C9 / approx.386
	ARMRQ FX	R	C8 / approx.344	C8 / approx.350	C8 / approx.357	C8 / approx.363	C8 / approx.370	C8 / approx.376	C8 / approx.379		C9 / approx.387
		SR	C9 / approx.350	C9 / approx.356	C9 / approx.363	C9 / approx.369	C9 / approx.376	C9 / approx.382	C9 / approx.385		D0 / approx.393
		S	C9 / approx.351	C9 / approx.357	C9 / approx.364	C9 / approx.370	C9 / approx.377	C9 / approx.383	C9 / approx.386		D0 / approx.394

Made in Japan

BERES09 IRON – SHAFT

ARMRQ FX 5S

ARMAQ FX LIGHT 5S

ARMAQ FX LIGHT 2S

ARMRQ FX 5S & ARMAQ FX LIGHT 5S

Model	Flex	Length(mm)	Weight(g)	Torque(°)	Tip Diameter(㎜)	Butt Diameter(㎜)	Kick-Point
ARMRQ FX LIGHT 5S	R	964	47.0	4.20	9.3	14.5	MID-LOW
ARMRQ FX 5S	R	1,030	48.5	4.15	9.3	14.5	MID-LOW
	SR		52.5	4.06		15.3
	S		53.5	3.96		15.4

BERES09 IRON – Grip

NAME	GR HONMA RUBBER 41 GD
MATERIAL	RUBBER
WEIGHT (g)	41.0
SIZE	60

Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Gậy Golf Sắt Iron Honma Beres09 5sao (#5-#11, AW, SW)

BERES (2024 model) IRON 5STAR

IRON allows you to aim for the pin with high trajectory flight.

Uneven thickness face structure

The evolved face thickness increases the repulsive force of the face. Achieves high distance performance with high initial velocity and high trajectory.

Wide L cup face

By eliminating the receiver on the body side, the face area has been expanded. The repulsion area has been expanded, and the high tolerance against vertical and horizontal hit point shakes allows for stable shots.

Vibration absorbing resin midlayer

Vibration at the time of impact is absorbed by incorporating vibration-absorbing resin inside the cavity. This results in a comfortable hitting feel and sound.

Adopting the industry’s first high-strength carbon sheet -ARMRQ FX shaft-

*Metal hybrid 5-shaft sheet

Aluminum High-strength material laminated with highly elastic 70t pitch on the back side of the metal shaft. Since shaft winding requires special technology, this is the first seat in the industry that was made possible by HONMA, which employs highly skilled craftsmen.

By having a kick point at hand, the directional stability of the trajectory is improved.

ARMRQ FX has a kick point that is slightly closer to the hand than the previous model, resulting in a more stable swing trajectory and more accurate shots. In addition, the increased suppleness creates a greater bend and improves flight distance performance.

The lighter shaft allows the head to accelerate further at impact.

The new shaft, which is lighter than the previous model, improves head balance first. This allows the head to run and increase flight distance.

The performance of the shaft increases depending on the grade.

It is characterized by the shape memory performance of a new material that goes beyond common sense by significantly improving the elongation rate of high-modulus carbon. Compared to “T1100G”, it has superior shape retention performance and is suitable for long lengths and reinforcement.

HONMA was the first in the industry to use this high-performance prepreg, which is now widely used, including by other manufacturers. Achieves both “high elasticity and high strength”.

The kick point has been moved a little closer to hand than the previous model, making timing easier. The large bend increases flight distance with a high trajectory. In addition, the ease of swinging improves the reproducibility of swings and achieves stable shots.

The highly elastic Trading Card® M40X , which pursues the ultimate in both fiber strength and elastic modulus , provides superior playing performance that efficiently accelerates head speed without waste, while suppressing torque and improving stability.

In order to further increase head speed, the kick point is moved closer to the tip. At the same time, crushing and torque are further suppressed, and stability is increased along with initial speed.

From the 4S grade, the bias layer has been further strengthened to generate strong torsional return power. This provides ultimate flight and stability.

ARMRQ lightweight model -ARMRQ FX LIGHT-

This shaft is recommended for seniors and low swing speed players who cannot swing or increase distance with the regular ARMRQ FX/R flex, and female golfers who feel that regular ladies’ clubs are underspec.

BERES09 IRON – SPEC

No. /Loft (deg.)

#5 / 21.0

#6 / 24.0

#7 / 27.0

#8 / 31.0

#9 / 35.0

#10 / 40.0

#11 / 45.0

AW / 50.0

SW / 55.0

Head Material/Manufacturing

【#5-9】Mild Steel 25C Body (Forged)＋AM355P Face (Casting) 【#10-SW】Mild Steel S25C Body (Forged)＋ES235 Face

Finish

Nickel Chrome Plating (2-layer Plating)＋Satin+Mirror＋Painting (Gold Plating)

Lie Angle (deg.)

61.0

61.5

62.0

62.5

63.0

64.0

Offset(mm)

4.0

3.7

3.5

3.0

2.0

Length(inch)

38.25

37.75

37.25

36.75

36.25

35.75

35.5

35.0

Swing Weight/Total Weight(g)

ARMRQ FX LIGHT

R

C8 / approx.343

C8 / approx.349

C8 / approx.356

C8 / approx.362

C8 / approx.369

C8 / approx.375

C8 / approx.378

C9 / approx.386

ARMRQ FX

R

C8 / approx.344

C8 / approx.350

C8 / approx.357

C8 / approx.363

C8 / approx.370