Lọc

Gậy Golf Fairway Wood Honma Beres09 3sao

18,204,000vnđ

Liên hệ
Hotline đặt hàng 028.6686.1177 – 0907.33.22.66
(8-20h cả T7, CN)

Email: info@vhgolf.com.vn

Mô tả

BERES (2024 model) FAIRWAY WOOD 3STAR

FW that automatically provides maximum flight distance placing the weight closer to the back heel improves grip performance. The shallow head shape with a large projected area maximizes flight distance with a high trajectory both on the tee and on the fairway.

Tungsten weight by placing a 14g (screw included) weight near the back heel, grip performance is improved.

Uneven thickness face & crown

Repulsion performance is improved by making the face area and crown thinner. Furthermore, the repulsion area has been expanded (compared to the previous model).

Sole thickness and center of gravity flow design by count

The ideal trajectory is achieved by adopting a center of gravity design for each count.

Adopting the industry’s first high-strength carbon sheet -ARMRQ FX shaft-

The ARMRQ shaft has evolved to allow for easier grip and higher trajectory. This time, we purposely reduced the number of fabric shafts, which have increased with each model change, to reduce weight, while maintaining strength by adopting a highly elastic 70t pitch for the fibers used for the shafts. This makes it possible to reduce weight, make the flex more supple, have a kick point closer to the hand, and place the balance point closer to the head, achieving high reproducibility and “flying and not bending.” 17% lighter than the previous model for the fabric alone

Adopting the industry's first high-strength carbon sheet -ARMRQ FX shaft-

*Metal hybrid 5-shaft sheet
Aluminum High-strength material laminated with highly elastic 70t pitch on the back side of the metal shaft. Since shaft winding requires special technology, this is the first seat in the industry that was made possible by HONMA, which employs highly skilled craftsmen.

By having a kick point at hand, the directional stability of the trajectory is improved.

ARMRQ FX has a kick point that is slightly closer to the hand than the previous model, resulting in a more stable swing trajectory and more accurate shots. In addition, the increased suppleness creates a greater bend and improves flight distance performance.

The lighter shaft allows the head to accelerate further at impact.

The new shaft, which is lighter than the previous model, improves head balance first. This allows the head to run and increase flight distance.

The performance of the shaft increases depending on the grade.

All grades use the carbon fiber Torayca® MX series prepreg developed by Toray Industries, Inc., which has both high compressive strength and high modulus of elasticity . Furthermore, because HONMA’s technology adjusts the shaft structure and materials used to match the grade, the higher the grade, the better the distance performance and directional stability.

ARMRQ FX 2S

The kick point is placed slightly closer to the bat, making it easier to time the swing, suppressing unnecessary spin, and utilizing the flex of the shaft to increase flight distance with a high trajectory. It makes easy swing and leads to stable shot by increased reproducibility.

ARMRQ FX 3S

The high-elasticity TORAYCA® M40X, which pursues the ultimate in both fiber strength and elastic modulus, provides superior playing performance that efficiently accelerates head speed without waste, while at the same time suppressing torque and improving stability.

ARMRQ FX 4S

The kick point is designed closer to the tip to further improve H/S. At the same time, shaft crushing, and torque are further suppressed, increasing initial speed and stability.

ARMRQ FX 5S

From the 4S grade, the bias layer has been further strengthened to generate strong torsional return power. This is an ultra-premium shaft that achieves the ultimate flight and stability.

ARMRQ FX LIGHT

This is recommended for seniros and low swing speed players who cannot swing or increase distance with the regular ARMRQ FX/R flex, and female golfers who feel that regular ladies’ clubs are underspec.

BERES09 FAIRWAY – SPEC

No.			3W	５W
Loft (deg.)			15.0	18.0
Head Material			SUS630 Body (Casting)＋Tungsten Weight＋High Strength Custom Steel (Rolling)
Head Volume(㎤)			186	172
Lie Angle (deg.)			59.0	59.5
Length(inch)			43.0	42.5
Swing Weight/Total Weight(g)	ARMRQ FX LIGHT	R	C8 / approx.296	C8 / approx.300
	ARMRQ FX	R	D0 / approx.301	D0 / approx.305
		SR	D1 / approx.306	D1 / approx.310
		S	D1 / approx.309	D1 / approx.313

Made in Japan

BERES09 FAIRWAY – SHAFT

ARMRQ FX 3S

ARMRQ FX LIGHT 3S

ARMAQ FX LIGHT BLACK

ARMRQ FX 3S

Model	Flex	Length(mm)	Weight(g)	Torque(°)	Tip Diameter(㎜)	Butt Diameter(㎜)	Kick-Point
ARMRQ FX LIGHT 3S	R	1,093	42.0	7.10	8.6	15.2	MID
ARMRQ FX 3S	R	1,093	44.5	7.05	8.6	15.2	MID
	SR		48.0	6.35		15.6
	S		50.0	6.25		15.6

BERES09 FAIRWAY – Grip

NAME	GR HONMA RUBBER 41 GD
MATERIAL	RUBBER
WEIGHT (g)	41.0
SIZE	60

Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Gậy Golf Fairway Wood Honma Beres09 3sao

BERES (2024 model) FAIRWAY WOOD 3STAR

FW that automatically provides maximum flight distance placing the weight closer to the back heel improves grip performance. The shallow head shape with a large projected area maximizes flight distance with a high trajectory both on the tee and on the fairway.

Tungsten weight by placing a 14g (screw included) weight near the back heel, grip performance is improved.

Uneven thickness face & crown

Repulsion performance is improved by making the face area and crown thinner. Furthermore, the repulsion area has been expanded (compared to the previous model).

Sole thickness and center of gravity flow design by count

The ideal trajectory is achieved by adopting a center of gravity design for each count.

Adopting the industry’s first high-strength carbon sheet -ARMRQ FX shaft-

*Metal hybrid 5-shaft sheet Aluminum High-strength material laminated with highly elastic 70t pitch on the back side of the metal shaft. Since shaft winding requires special technology, this is the first seat in the industry that was made possible by HONMA, which employs highly skilled craftsmen.

By having a kick point at hand, the directional stability of the trajectory is improved.

ARMRQ FX has a kick point that is slightly closer to the hand than the previous model, resulting in a more stable swing trajectory and more accurate shots. In addition, the increased suppleness creates a greater bend and improves flight distance performance.

The lighter shaft allows the head to accelerate further at impact.

The new shaft, which is lighter than the previous model, improves head balance first. This allows the head to run and increase flight distance.

The performance of the shaft increases depending on the grade.

ARMRQ FX 2S

The kick point is placed slightly closer to the bat, making it easier to time the swing, suppressing unnecessary spin, and utilizing the flex of the shaft to increase flight distance with a high trajectory. It makes easy swing and leads to stable shot by increased reproducibility.

ARMRQ FX 3S

The high-elasticity TORAYCA® M40X, which pursues the ultimate in both fiber strength and elastic modulus, provides superior playing performance that efficiently accelerates head speed without waste, while at the same time suppressing torque and improving stability.

ARMRQ FX 4S

The kick point is designed closer to the tip to further improve H/S. At the same time, shaft crushing, and torque are further suppressed, increasing initial speed and stability.

ARMRQ FX 5S

From the 4S grade, the bias layer has been further strengthened to generate strong torsional return power. This is an ultra-premium shaft that achieves the ultimate flight and stability.

ARMRQ FX LIGHT

This is recommended for seniros and low swing speed players who cannot swing or increase distance with the regular ARMRQ FX/R flex, and female golfers who feel that regular ladies’ clubs are underspec.

BERES09 FAIRWAY – SPEC

No.

3W

５W

Loft (deg.)

15.0

18.0

Head Material

SUS630 Body (Casting)＋Tungsten Weight＋High Strength Custom Steel (Rolling)

Head Volume(㎤)

186

172

Lie Angle (deg.)

59.0

59.5

Length(inch)

43.0

42.5

Swing Weight/Total Weight(g)

ARMRQ FX LIGHT

R

C8 / approx.296

C8 / approx.300

ARMRQ FX

R

D0 / approx.301

D0 / approx.305

SR

D1 / approx.306

D1 / approx.310

S

D1 / approx.309

D1 / approx.313

Made in Japan

BERES09 FAIRWAY – SHAFT

ARMRQ FX 3S

ARMRQ FX LIGHT 3S

ARMRQ FX 3S

Model

Flex

Length(mm)

Weight(g)

Torque(°)

Tip Diameter(㎜)

Butt Diameter(㎜)

Kick-Point

ARMRQ FX LIGHT 3S

R

1,093

42.0

7.10

8.6

15.2

MID

ARMRQ FX 3S

*Metal hybrid 5-shaft sheet
Aluminum High-strength material laminated with highly elastic 70t pitch on the back side of the metal shaft. Since shaft winding requires special technology, this is the first seat in the industry that was made possible by HONMA, which employs highly skilled craftsmen.