TECHNOLOGY
New face structure raises flight trajectory
A wide sole flange of the new face structure raises trajectory and increases distance.
This new structure is 12mm wider than the IS-03
※Wide New face structure available in the 5-thru-8-irons.
Face repulsion increases
Three slots on the sole flange are part of wide the new face structure face, which helps increase clubface repulsion.
※available in the 5-thru-8-irons
①：1slot on side of face②③：2 slots on soleTotal 3 slots
※available in the 5-thru-8-irons
Long iron as easy to hit as a hybrid
Long iron has a similar shape, head size and wide sole compared to the hybrids, making them easier to hit.
Sole width: about 2.5mmwider (#4Size comparison)
Head size: about 1.5mmwider (#4Size comparison)
SPEC BERES IS-06 Left Handed
| Head material / Manufacturing process | Mild steel / Forged | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Face material / Manufacturing process | 5-thru-8-iron | Maraging stainless steel (AM355P) / Wide New face structure lrregular structure |
|||||||||
| 9-iron thru SW | Maraging stainless steel (ES235) / Flat face structure | ||||||||||
| Shaft | ARMRQ X 47, ARMRQ X 60, ARMRQ X 52, ARMRQ X 43 | ||||||||||
| # (No.) | 5 | 6 | 7 | 8 | 9 | 10 | 11 | AW | SW | ||
| Length (inches) | 38.0 | 37.5 | 37.0 | 36.5 | 36.0 | 35.5 | 35.0 | 35.0 | 35.0 | ||
| Loft (deg.) | 22.5 | 25.5 | 28.5 | 32.5 | 36.5 | 41.5 | 46.5 | 51.5 | 56.0 | ||
| Lie angle (deg.) | 61.0 | 61.5 | 62.0 | 62.5 | 63.0 | 63.0 | 63.0 | 63.0 | 64.0 | ||
| Face progression (mm) | 2.75 | 3.05 | 3.25 | 3.25 | 3.25 | 3.25 | 3.75 | 3.75 | 4.75 | ||
| Distance to Center of Gravity (mm) | 37.0 | 37.5 | 38.0 | 38.0 | 37.0 | 37.0 | 37.0 | 36.5 | 36.5 | ||
| Height to Center of Gravity (mm) | 19.5 | 20.0 | 20.0 | 21.0 | 21.0 | 21.0 | 22.0 | 22.5 | 22.5 | ||
| Depth to Center of Gravity (mm) | 7.0 | 6.5 | 6.0 | 5.5 | 5.0 | 4.5 | 4.0 | 3.5 | 3.0 | ||
| Gravity Angle (deg.) | 14.0 | – | – | – | – | – | – | – | – | ||
| Swing weight・ Gross weight (g) |
ARMRQ X 47 | R | C8・355 | C8・361 | C8・367 | C8・376 | C8・383 | C8・393 | C8・399 | C8・399 | C9・401 |
| SR | C9・358 | C9・364 | C9・370 | C9・379 | C9・386 | C9・396 | C9・402 | C9・402 | D0・404 | ||
| S | C9・359 | C9・365 | C9・371 | C9・380 | C9・387 | C9・397 | C9・403 | C9・403 | D0・405 | ||
| ARMRQ X 60 | R | C9・372 | C9・379 | C9・384 | C9・394 | C9・400 | C9・410 | C9・417 | C9・417 | D0・419 | |
| SR | D0・375 | D0・382 | D0・387 | D0・397 | D0・403 | D0・413 | D0・420 | D0・420 | D1・422 | ||
| S | D0・376 | D0・383 | D0・388 | D0・398 | D0・404 | D0・414 | D0・421 | D0・421 | D1・423 | ||
| SX | D1・379 | D1・386 | D1・391 | D1・401 | D1・407 | D1・417 | D1・424 | D1・424 | D2・426 | ||
| X | D1・380 | D1・387 | D1・392 | D1・402 | D1・408 | D1・418 | D1・425 | D1・425 | D2・427 | ||
| ARMRQ X 52 | R | C9・359 | C9・366 | C9・371 | C9・381 | C9・387 | C9・397 | C9・404 | C9・404 | D0・406 | |
| SR | D0・362 | D0・369 | D0・374 | D0・384 | D0・390 | D0・400 | D0・407 | D0・407 | D1・409 | ||
| S | D0・363 | D0・370 | D0・375 | D0・385 | D0・391 | D0・401 | D0・408 | D0・408 | D1・410 | ||
| ARMRQ X 43 | R | C8・352 | C8・358 | C8・364 | C8・373 | C8・379 | C8・388 | C8・395 | C8・395 | C9・397 | |
| S | C9・355 | C9・361 | C9・367 | C9・376 | C9・382 | C9・391 | C9・398 | C9・398 | D0・400 | ||
Data refers to the 2S grade
Made in Japan
Picture is for right hand product.
Picture is for right hand product.
| 2S | 3S | 4S |
|---|
SHAFT ARMRQ X
ARMRQ X 47(Standard feature)
| Material | Carbon + ten-axisUD | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Kick-point | Low-mid | |||||||||
| Flex | R,SR,S | |||||||||
| Tip diameter (mm) | 9.3 | |||||||||
| # (No.) | 5 | 6 | 7 | 8 | 9 | 10 | 11 | AW | SW | |
| Gross weight (g) | R | 48.0 | 48.5 | 48.0 | 51.5 | 51.0 | 54.5 | 54.0 | 54.0 | 54.0 |
| SR | 49.5 | 50.0 | 49.5 | 53.0 | 52.5 | 56.0 | 55.5 | 55.5 | 55.5 | |
| S | 51.0 | 51.5 | 51.0 | 54.5 | 54.0 | 57.5 | 57.0 | 57.0 | 57.0 | |
| Torque (deg.) | R | 3.38 | 3.31 | 3.24 | 3.11 | 3.04 | 2.91 | 2.84 | 2.84 | 2.84 |
| SR | 3.33 | 3.26 | 3.19 | 3.06 | 2.99 | 2.86 | 2.79 | 2.79 | 2.79 | |
| S | 3.28 | 3.21 | 3.14 | 3.01 | 2.94 | 2.81 | 2.74 | 2.74 | 2.74 | |
| Frequency (cpm) | R | 261 | 269 | 277 | 289 | 297 | 309 | 317 | 317 | 317 |
| SR | 269 | 277 | 285 | 297 | 305 | 317 | 325 | 325 | 325 | |
| S | 277 | 285 | 293 | 305 | 313 | 325 | 333 | 333 | 333 | |
Data refers to the 2S grade/shaft only
ARMRQ X 60
| Material | Carbon + ten-axisUD | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Kick-point | High-mid | |||||||||
| Flex | R,SR,S,SX,X | |||||||||
| Tip diameter (mm) | 9.3 | |||||||||
| # (No.) | 5 | 6 | 7 | 8 | 9 | 10 | 11 | AW | SW | |
| Gross weight (g) | R | 61.0 | 62.0 | 61.0 | 65.0 | 64.0 | 68.0 | 67.0 | 67.0 | 67.0 |
| SR | 62.5 | 63.5 | 62.5 | 66.5 | 65.5 | 69.5 | 68.5 | 68.5 | 68.5 | |
| S | 64.0 | 65.0 | 64.0 | 68.0 | 67.0 | 71.0 | 70.0 | 70.0 | 70.0 | |
| SX | 65.5 | 66.5 | 65.5 | 69.5 | 68.5 | 72.5 | 71.5 | 71.5 | 71.5 | |
| X | 67.0 | 68.0 | 67.0 | 71.0 | 70.0 | 74.0 | 73.0 | 73.0 | 73.0 | |
| Torque (deg.) | R | 3.08 | 3.01 | 2.94 | 2.81 | 2.74 | 2.61 | 2.54 | 2.54 | 2.54 |
| SR | 3.03 | 2.96 | 2.89 | 2.76 | 2.69 | 2.56 | 2.49 | 2.49 | 2.49 | |
| S | 2.98 | 2.91 | 2.84 | 2.71 | 2.64 | 2.51 | 2.44 | 2.44 | 2.44 | |
| SX | 2.93 | 2.86 | 2.79 | 2.66 | 2.59 | 2.46 | 2.39 | 2.39 | 2.39 | |
| X | 2.88 | 2.81 | 2.74 | 2.61 | 2.54 | 2.41 | 2.34 | 2.34 | 2.34 | |
| Frequency (cpm) | R | 312 | 321 | 330 | 340 | 350 | 361 | 373 | 373 | 373 |
| SR | 320 | 329 | 338 | 348 | 358 | 369 | 381 | 381 | 381 | |
| S | 328 | 337 | 346 | 356 | 366 | 377 | 389 | 389 | 389 | |
| SX | 336 | 345 | 354 | 364 | 374 | 385 | 397 | 397 | 397 | |
| X | 344 | 353 | 362 | 372 | 382 | 393 | 405 | 405 | 405 | |
Data refers to the 2S grade/shaft only
ARMRQ X 52
| Material | Carbon + ten-axisUD | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Kick-point | Mid | |||||||||
| Flex | R,SR,S | |||||||||
| Tip diameter (mm) | 9.3 | |||||||||
| # (No.) | 5 | 6 | 7 | 8 | 9 | 10 | 11 | AW | SW | |
| Gross weight (g) | R | 52.5 | 53.5 | 52.5 | 56.5 | 55.5 | 59.5 | 58.5 | 58.5 | 58.5 |
| SR | 54.0 | 55.0 | 54.0 | 58.0 | 57.0 | 61.0 | 60.0 | 60.0 | 60.0 | |
| S | 55.5 | 56.5 | 55.5 | 59.5 | 58.5 | 62.5 | 61.5 | 61.5 | 61.5 | |
| Torque (deg.) | R | 3.18 | 3.11 | 3.04 | 2.91 | 2.84 | 2.71 | 2.64 | 2.64 | 2.64 |
| SR | 3.13 | 3.06 | 2.99 | 2.86 | 2.79 | 2.66 | 2.59 | 2.59 | 2.59 | |
| S | 3.08 | 3.01 | 2.94 | 2.81 | 2.74 | 2.61 | 2.54 | 2.54 | 2.54 | |
| Frequency (cpm) | R | 268 | 276 | 284 | 296 | 304 | 314 | 323 | 323 | 323 |
| SR | 276 | 284 | 292 | 304 | 312 | 322 | 331 | 331 | 331 | |
| S | 284 | 292 | 300 | 312 | 320 | 330 | 339 | 339 | 339 | |
Data refers to the 2S grade/shaft only
ARMRQ X 43
| Material | Carbon + ten-axisUD | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Kick-point | Low | |||||||||
| Flex | R,S | |||||||||
| Tip diameter (mm) | 9.3 | |||||||||
| # (No.) | 5 | 6 | 7 | 8 | 9 | 10 | 11 | AW | SW | |
| Gross weight (g) | R | 44.5 | 45.0 | 44.5 | 48.0 | 47.5 | 51.0 | 50.5 | 50.5 | 50.5 |
| S | 46.0 | 46.5 | 46.0 | 49.5 | 49.0 | 52.5 | 52.0 | 52.0 | 52.0 | |
| Torque (deg.) | R | 3.82 | 3.75 | 3.68 | 3.55 | 3.48 | 3.35 | 3.27 | 3.27 | 3.27 |
| S | 3.77 | 3.70 | 3.63 | 3.50 | 3.43 | 3.30 | 3.22 | 3.22 | 3.22 | |
| Frequency (cpm) | R | 248 | 255 | 263 | 271 | 279 | 288 | 298 | 298 | 298 |
| S | 256 | 263 | 271 | 279 | 287 | 296 | 306 | 306 | 306 | |
Data refers to the 2S grade/shaft only
GRIP
| Name | BERES RubberⅢ N47 Gold | |
|---|---|---|
| Material | Rubber | |
| Shaft | ARMRQ X 47, ARMRQ X 52, ARMRQ X 43 | |
| Gross weight (g) | 47.0 | |
| Size | 60 | |
| Name | BERES Rubber M60 White | |
|---|---|---|
| Material | Rubber | |
| Shaft | ARMRQ X 60 | |
| Gross weight (g) | 49.5 | |
| Size | 60 | |
Data refers to the 2S grade
Hãy là người đầu tiên nhận xét “BERESIS-06 Left Handed IRON”